Tendon Master 9.7mm Standard Rope 60m

Product Details

One of the most favorite ropes among our customers. MASTER 9.7 is time-proven, it offers an ideal diameter, SBS sheath and a long lifespan. One of the best ropes for rock climbing you can get. Offers an excellent value for money.

Product Specifications

Rope diameter (mm): 9.7
Weight (g/m): 61
Number of UIAA falls: 7
Max impact force (kN): 7.9
Sheath slippage (%): 0.1
Static elongation (%): 6
Dynamic elongation (%): 37
Knotability: 0.9
CE 1019: yes
EN 892: yes

Product Features

• Single ropes: For ascent where only one rope is used. This is the most basic and widely used method of using rope for ascents.
• Standard: Improved basic finishing of dynamic ropes. The new technological process enables the application of impregnation agents early in the standard finishing of the ropes.
• Complete Shield: Maximum level of rope protection against water and abrasion. It is reached by using the new progressive NANOTECHNOLOGY method. Tiny particles of TEFLON?Eco are applied to the rope sheath and core and make a film of almost impermeable protective layer. The rope fibres are then protected against dust and water which would othervise cause a harm to the rope construction. COMPLETE SHIELD is an impregnation which extends the general lifespan of TENDON ropes significantly. All ropes with the Complete Shield finish meet the UIAA 101 requirement for water repellent test.
• Tendon electronic note system (TeNOTE): Rope marking system by means of a microchip.
• SBS – Simple Braid System: SBS (is system where each strand is plaited separatelly into the sheath construction and not in pair (tandem). SBS braiding makes the sheath surface much more compact and smoother. Therefore ropes made by SBS generate much lower friction, are more resistant to abrasion and last longer while in contact with rocks.
• Compact: Our own special technology has been used for the ends of the rope. In a length of 15 mm, the core strand and sheath are connected into one unit.
• Midpoint of rope: At half of the length, the rope is visibly marked by coloured band, which does not affect the core structure and its mechanical properties. Lengths 30 – 80 m only.
• Bicolour: A new, clearly identifiable change of rope pattern in the middle. Bicolour brings comfort in rope handling and is advantageous especially for descending. The change of pattern is practical also when climbing with half ropes and contributes to improvement of ropework as well as to safety in general.
• CE – symbol of compliance: This symbol confirms that the product meets safety requirements specified in the relevant Europen regulations. The number following symbol (e.g. CE1019) is number of notified body which performs checking of production: VVU??, a.s., Pikartsk?­ 1337/7, 71607 Ostrava- Radvanice, Czech Republic
• UIAA: Products marked with this symbol meet UIAA requirements.The UIAA is the International Mountaineering and Climbing Federation.